Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pumps/Inflation

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g
$0.95 $1.00 5% Off
Replacement UHP head O-ring seal
$4.99
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$5.00
Rebuild kit for the MTB floor pump. - Compatible with Air Tool MTB floor pump. - Includes O-ring, lube, and grommet.
$5.00
Rebuild kit for our most common Air Tool floor pumps. - Compatible with Air Tool Pro, Comp, and Sport floor pumps. - Includes O-ring lube and grommet.
$10.99 - $11.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$12.00
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
$14.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$20.00
This durable pump with SwitchHitter head automatically adjusts for Schrader or Presta valves. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
$26.49
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
$30.00
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
$30.00
Small, efficient, reliable—the three key features of the Air Tool MTB Mini pump. With the inverted dual chamber design, this pump moves 20% more air per stroke than the unit it replaced, yet is 10% smaller. - Inverted dual chamber design is smaller yet moves 20% more air per stroke when compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head is easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping. - Aluminum inner and outer chamber for durable performance. - Water bottle boss frame mounting bracket included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 55cc - Water bottle boss frame mounting bracket included.
$30.00
The best road mini pump does two things well—it inflates tubes quickly, and it stashes easily. The reliable Air Tool Road Mini pump moves almost twice as much air as its predecessor, thanks to its inverted dual chamber design. It gives you total peace of mind on days when pesky flats catch you off-guard. - Inverted dual chamber design is smaller yet moves 58% more air per stroke when compared to our previous design, reducing pumping time by up to four minutes. - Presta-only head with updated dust cover prevents pump from opening due to vibration. - Machined outer barrel for extra grip while pumping. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss frame mounting bracket included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 30cc - Volume-per-stroke: 30cc - Water bottle boss frame mounting bracket included.
$30.00
This durable frame pump with SwitchHitter head automatically adjusts for Schrader or Presta valve tubes and shows pressure on a rotatable gauge. - SwitchHitter head works on Schrader or Presta valves with no disassembly. - Gauge body rotates for easy viewing. - Durable plastic barrel with aluminum shaft to reduce flex and improve efficiency. - Plunger locks to body chamber with a simple twist for secure storage. - Water bottle boss mount included. - Max pressure: 120psi (8.3bar) - Volume per stroke: 48.4cc
$30.00
- Head/Hose for Air Tool UHP pump
$30.00
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
$34.99
The Air Tool Road is a minimalistic frame pump that provides efficiency and reliability for high-pressure road tires. - All new, inverted double chamber design increases the air handling capacity by 25% compared to our previous design, reducing pumping time by up to two minutes. - Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 100 PSI (6.9 bar) - Volume-per-stroke: 60cc
$35.00 - $40.00
The Air Tool Flex MTB/Road uses an inverted chamber design that allows for quick fill-up on mountain tires but can still reach the high pressures needed for road tires. - Twin Schrader and presta thread on T-head - Inverted barrel design allows for efficient high volume and high pressure pumping - Lightweight and compact hose with built-in flex to prevent excess stress on valve stems - Water bottle boss mount included
$35.00
The Air Tool MTB pump is Speialized's most dependable and durable big-volume frame pump. It's intended to be carried on the bike for use in all off-road conditions. You'll find that it features a new inverted design, so it greatly increases air capacity, which reduces pump time by up to two minutes. - All new inverted, double chamber design increases the air handling capacity by 28% compared to our previous design, reducing pumping time by up to two minutes. - Twist locking head reduces size and can be easily converted to fit Presta or Schrader valves. - Machined outer barrel for extra grip while pumping.. - All-aluminum inner and outer chamber for durable performance. - Water bottle boss mount included. - Max pressure: 60 PSI (4.1bar) - Volume-per-stroke: 100cc
$38.00
Stay pumped. Combine the speed and convenience of CO2 with the trusty safety-net of a traditional pump for a sleek, integrated, and stowable package. Where it thrives On the bike, the open road What it's built for Versatility, efficiency Highlights - Pocket-sized (7.2"/ 18cm) mini pump with built-in CO2 inflator / quality aluminum construction with ergonomic CNC-machined surface - Dual-chamber telescopic design maximizes volume for easy inflation up to 100 psi (6.9 bar) - Dual-head design with dedicated outlets for presta valve and CO2 / 16 gram CO2 cartridge included
$39.95
Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.
$42.00
Stay pumped. Packed with clever features that prioritize convenience and functionality, and gets smaller volume road tires to higher pressures effortlessly. Where it thrives: On the bike, the open road What it's built for: Efficiency, convenience Highlights: - Quality aluminum construction with ergonomic CNC-machined surface / bottle cage mount / length: 8.3" (21cm) - Retractable flexible hose, fully sealed weatherproof internals / lever lock pump head compatible with all bicycle tire valves - Maximized air volume design for easy inflation up to 100 psi (6.9 bar)
$45.00
Fix it fast. Contains everything needed for quick, hassle-free puncture repairs, while providing multiple on-bike mounting options – just add a tube of choice. Where it thrives: On the bike, challenging trails, the open road What it's built for: Fixing, versatility Highlights: - Twist-controlled micro Co2 inflator with built-in non-pierce Co2 cartridge storage - Tough, lightweight PriBar tire levers, two 16g Co2 cartridges, and molded silicone insulator sleeve included - Stretchy, non-abrasive polyurethane straps fit any bike and won't absorb mud and water (2x sizes)
$45.00
Gear up with the CK-7 Combo Kit with compact Mini Pump. Toss a spare tube in the saddle bag and you've got everything you need to changes flats on the road. Includes: - Mini Pump - 6 Piece Mini Tool - 2 Tire Levers - Medium Saddle Bag - Ballistic Nylon Bottle Cage
$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
$48.00
Stay pumped. Packed with clever features that prioritize convenience and functionality, and gets large volume off-road tires to the correct pressures quickly. Where it thrives: On the bike, challenging trails What it's built for: Efficiency, control Highlights: - Quality aluminum construction with ergonomic CNC-machined surface / bottle cage mount / length: 9.4" (24cm) - Retractable flexible hose, fully sealed weatherproof internals / lever lock pump head compatible with all bicycle tire valves - Maximized air volume design for easy inflation up to 60 psi (4.1 bar)
$50.00
Stay pumped. An incredibly easy-to-use gauge is paired with a stable base and durable body for an ideal go-to pump for inflating any bicycle tire. Where it thrives: In the garage What it's built for: Efficiency, Stability Highlights: - Tough steel base, durable barrel / extra-large 5" (130mm) gauge offers increased readability - Recommended pressure ranges help select suitable tire pressure - AutoSelect head adjusts to Schrader and Presta valves
$50.00
Designed for Fat and Semi Fat tire bikes, the Big Bore packs massive volume per stroke and a unique head that still works with winter gloves on - Oversized press-on Schrader and Presta head won't accidentally remove valve cores and can be easily used with thick gloves. - Flexible hose attachment allows for aggressive pumping without fear of damaging valve stems. - Inverted barrel design allows for high volume in a compact size. - Coarse machined aluminum barrel for extra grip. - Water bottle boss mount with elastomer band included. - Max pressure: 50psi (3.5bar) - Volume per stroke: 90cc
Page 1 of 2 Next page